学院
17 June 2019

Correct engine oil prevents Low Speed Pre Ignition (LSPI)

Because of internal combustion engine downsizing, a new phenomenon occurs more often: Low Speed Pre Ignition (LSPI). LSPI cannot be heard and cannot be foreseen, however it causes severe engine damage. In this article, we elaborate on LSPI.

Automotive engines are required by law to become cleaner and the market demands more efficient engines. On the other side, the performance should increase. Car manufacturers accomplish this by downsizing gasoline engines and applying technologies like exhaust gas recirculation, catalytic converters, turbochargers and direct injection.

Because of these modifications, engine stress is ever increased. This in turn increases the chance of severe engine damage. The cause of engine damage is still heavily debated but one possible cause is  LSPI.

What is LSPI?
LSPI is an unwanted and uncontrolled combustion, not to be confused with pinging. Modern vehicles operate in a gear as high as possible to maximise fuel efficiency. When accelerating in low RPM, the load on the engine is extremely high. At low RPM and under high loads in a TGDI (Turbocharged Gasoline Direct Injection) engine, LSPI can occur.

Low Speed Pre-Ignition is an unwanted phenomenon because the combustion takes place during the compression stroke; the moment that the crankshaft forces the piston upwards towards top dead centre. Fuel is injected into the combustion chamber during the compression stroke and carbon embers ignite the fuel. The gases expand while the piston is still compressing, resulting in an extreme increase in pressure in the combustion chamber.

When the combustion takes place during the compression stroke, this can cause serious damage to the engine, since the piston and all components below need to absorb the pressure shock. To keep the combustion chamber free from carbon particles, the engine oil needs to be able to remove deposits from the cylinder wall.

Eurol Protence GN II
A critical factor in reducing LSPI events is choosing the correct engine oil. Every car manufacturer develops its own specific engines, which in turn all require their own engine oil. Roughly fifteen years ago, only three to four engine oils were required to service an entire fleet. Currently, over ten different types of oil are required.

To avoid breakdown and costly repairs, it is essential to use the correct engine oil. Eurol has a rich history in developing engine oil and has used this expertise to develop an oil with extra protection against LSPI. Eurol Protence GN II is available for gasoline and hybrid engines for passenger cars equipped with direct injection engines, turbochargers and catalytic converters. The oil has been tested and approved by car OEMs and meets the highest standards regarding wear protection.